Concrete reinforcement polymer Fiber For Reducing Plastic Shrinkage
Elite Macro Synthetic Fiber of Wave Form is a patented
polypropylene / polyethylene macro synthetic fiber successfully
used to replace steel fibers, welded wire mesh and conventional
reinforcing bars in a wide variety of applications. Our Macro
Synthetic Fiber comply with ISO CE and suitable for Concrete and
Shotcrete, and are specifically used to provide equivalent tensile
and bending resistance to conventional reinforcement requirements.
Virgin grade copolymer
Melting Point(C Deg.) :
160 - 170
30mm, 48mm, 54mm or as per request
2. Packing & Delivery
Packing : 1.0kg per PE bag; 10 kgs/plastic woven bag;
total 3100 kgs/1x20`gp; 7500 kgs/1x40`hq
3-15 days after deposit (we always keep inventory)
1-3 days after confirmation
T/T, L/C, Western Union or as per negotiate
3. Directions For Use
1, Ration design of the fibre concrete:
Generally the recommended amount to add to the concrete is more
than 2.0-3.0 kg/m³ ( volume ratio is 0.3% ), reinforcement adding
amount is 5.5kg/m³ , Compared with adding 47kg of steel fibre,
5.4kg macro synthetic fibre has the same volume ratio to the
2, Matching Ratio:
Usually, it is no need to Change the matching ratio of the
3, Mixer Adoption: Double-axle horizontal compelling mixer is
4, Mixing process:
Crushed stones, fibers and sands are put into the mixer in
succession. After stirring for two minutes, fiber will fully spread
and then add cement and water and stir normally. The addition of
materials also can be put into as common concrete, but the stirring
time should be properly prolonged to make fiber completely Mixed.
5, Shaping & Maintenance
There is no special requirement, may along the vibrating time for
30s, The maintenance of the fibre concrete should be done same as
the normal concrete.
•Slab on Grade and elevated construction (distribution centers,
•Thin walled pre-cast (septic tanks, vaults, walls, etc.)
•Shotcrete for tunnel linings, pool construction and slope
•Pavements and white-toppings
5. Features & Benefits
Economy, Durable, High Tensile Strength
Compared with steel fiber, our fiber has the advantages of
anti-corrosion and wear-resistant reducing 50% cost with same
volume to steel fiber.
1. Equivalent strengths to WWM and rebar provided by engineering
2. Controls and mitigates plastic shrinkage cracking and reduces
segregation and bleed-water;
3. Provides three-dimensional reinforcement against micro and
4. Reduces equipment wear, fiber rebound and increases build-up
thickness compared to steel fibers for shotcrete applications;
5. Increases overall durability, fatigue resistance and flexural
6. Reduction of in-place cost versus wire mesh for temperature /
shrinkage crack control;
7. Easily added to concrete mixture at any time prior to placement;
8. Tested in accordance with ASTM C 1116, EN14889-2.
6. Related Products
Including Macro Synthetic Fiber Wave, we we also produce:
1. Polypropylene Micro fiber monofilament, fibrillated
2. Macro synthetic fiber Twist, Wave, Hybrid
3. Polyester (PET) Fiber for Bitumen concrete
Company Brief Introduction
ELITE was established in 2007, has become one of the leading and
professional suppliers of many kinds of Concrete Rei-nforcement
Fibers in the world market.
ELITE fibers are made by 100% virgin PP materials with advanced
equipment of yarn and cutting. We have one full set of precise
testing instrument and quality inspection team, technology research
& Development team.
Elite own a team with 10+ years experience.
We know well of Chinese Concrete reinforcement fibers on technical
inspection, marketing, transportation
We have been to many international exhibitions all over the world.
Hope to chat with all our customers face to face.
Recently exhibition information pls refer to our website.